Fuel Tank Capacity: 30-40L
Maximum Torque(Nm): 60-80Nm
Wheelbase: ≥2200mm
Brake System: Front disc+Rear dsic
Minimum Grand Clearance: ≥300mm
Tire Size: 30 x 10 x 14 in/30 x 10 x 14 in
Curb Weight: ≥500kg
Dimension: 416.6 x 162.5 x 167.1 cm
Maximum Speed: ≥100Km/h
Driving Type: 4WD
Payload Capacity: ≥500kg
Differential Lock: Equipped
Grade Ability: ≥25°
Cylinder Number: 2
Fuel: Gas / Diesel
Displacement: 1000cc
Transmission System: Shaft Drive
Engine Type: 4-Stroke
Power: > 1000W
Voltage: 12V
Transmission Type: Automatic
ENGINE: 100 hp, Rotax 976 cc, V-twin, liquid-cooled
Drive Train: CVT,L/H/N/R/P
Power Steering: High-torque Tri-Mode Dynamic Power Steering (DPS)
Max power: 100 hp
Suspension Front: Double A-arm
Front Brake: Dual 262 mm ventilated disc brakes
Fuel supply System: EFI
Rear Suspension: 4-link Torsional Trailing-arm X (TTX)
Packaging Details: steel rack+ carton
Port: ZheJiang /HangZhou
| Warning:This product is design for adult.Not a children’s toyDue to its design and speed and being covered by the CE regulations.All powered vehicles are potentially dangerous and their use could involve the risk of injury or death, and they must be used in responsible manner. All nuts and bolts, tyre pressure and seating should be checked by a competent adult before every use.Accident damage should be attended to immediately and damaged parts replaced.Helmets and suitable protective safety equipment should be used at all times.Your product will arrive in a carton which contains a leaflet setting out the above warning notice, which you are strongly advised to read to the letter.Shipping:All our products are usually dispatch within 15 working days of receiving clear payment.For most orders, we offer free delivery to the portPayment:We accept payment by any of the following methods: western union or TTPlease pay as soon as possible after buying the item, as that will allow us to post your item to you sooner!BUY NOW!Returns:If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.You can return a product for up to 14 days from the date you purchased it.Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.You are responsible for return postage costs.DisclaimerWarning: It is illegal to ride electric scooters on public roads, pavements, or cycle paths. They are intended only for use on private land with the owner’s permission | ||||||||
| ENGINE 120 hp, 900 cc turbocharged triple-cylinder engine, Manufacturer Custom Made Various Injection Molding Type ABS Injection Molded Plastic Parts liquid-cooled and high-perfomance air filter Fuel Delivery System EFITransmission CVT L/H/N/R/P Drive Train 2WD/4WD Power Steering High-torque Tri-Mode Dynamic Power Steering (DPS) SUSPENSIONS Front Suspension Double A-arm with sway bar/20 in. (50.8 cm) travel Front Shocks FOX 2.5 PODIUM piggyback with QS3 compression adjustment Rear Suspension 4-link Torsional Trailing-arm X (TTX) with sway bar/20 in. (50.8 cm) travel Rear Shocks FOX 2.5 PODIUM piggyback with QS3 compression adjustment and bottom-out control TIRES & WHEELS Front Tires Maxxis Carnivore 30 x 10 x 14 in. Rear Tires Maxxis Carnivore 30 x 10 x 14 in. Wheels 14 in. cast-aluminum BRAKES Front Dual 262 mm ventilated disc brakes with hydraulic twin-piston calipers Rear Dual 248 mm ventilated disc brakes with hydraulic twin-piston calipers DIMENSIONS & CAPACITIES Estimated Dry Weight 1,810 lb (821 kg) Chassis/Cage Dual-phase 980 steel L x W x H 164 x 64 x 65.8 in. (416.6 x 162.5 x 167.1 cm) Wheelbase 135 in. (342.9 cm) Ground Clearance 13 in. (33 cm) Rack Capacity 150 lb (68 kg) with LinQ quick-attach Storage Capacity Total: 3 gal (11.4 L) Glove box: 1.6 gal (6.2 L) Central console: 1.1 gal (4.1 L) Cup holders: 0.3 gal (1.1 L) Fuel Capacity 10.5 gal (40 L) | value | |
What Is a Gearbox?
A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are three of the most common types of gearboxes used in automobiles.
Gearboxes
Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.
Coaxial helical gearbox
The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.
Epicyclic gearbox
An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and two planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of three different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than one stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.
Extruder helical gearing
The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.
1 speed gearbox
CZPT Group Components produces the one speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include two parts.
Generally, a one-speed gearbox will have up to seven forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have five different gear sets and five different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.
editor by czh2023-02-15