We – EPG Team the greatest gearbox & motors , torque limiter couplings and gears factory in China with 5 diverse branches. For far more information: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
one. Mixers:
one.1 Automated Container Mixer
Automated container mixer is wor ept with continuous content trolleys, the container fills the materials and lifted up and connnected tightly with mixing head routinely. The mixing head tilts collectively with the containers, and then receive the homogeneous mixing result, soon after ending mixing as per placing time, and return to unique place, the total method will be controlled by PLC
Primary Functions:
Several detachable containers for round operation
Large efficiency
Adopting PLC to recognize automation
Homogenized combination
No curing granule
Convenient for cleansing and routine maintenance
Risk-free and relaiable procedure
Technical Data:
| Model | Volume (L) | Output (kg/tank) | Mixing Motor (kw) | Tilting Motor (kw) | Crushing Motor (kw) | Mixing Time (min) | Handle Method | Total Proportions (MM) |
| FHJ-fifteen | fifteen | eight | 1.5 | 5-10 | PLC | 750*480*950 | ||
| FHJ-120 | one hundred twenty | 60 | 5.five | .2 | 5-10 | PLC | 1800*1800*1950 | |
| FHJ-150 | 150 | 70 | five.five | .37 | two.2 | five-ten | PLC | 2150*1100*2300 |
| FHJ-300 | 300 | one hundred fifty | 15 | 3 | 2.two | five-10 | PLC | 2150*1100*2300 |
| FHJ-600 | 600 | three hundred | 22 | four | four | 5-ten | PLC | 2650*1250*2700 |
| FHJ-a thousand | 1000 | five hundred | 30 | four | 4 | five-10 | PLC | 2900*1550*3100 |
| FHJ-2000 | 2000 | 1000 | 45 | 5.five | 5.five | five-10 | PLC | 3500*2350*3650 |
one.2 High Speed Pre-Mixer:
Features:
Large effectiveness & easy procedure
Effortless coloration altering, safe cleansing
Combined mixing & crushing as 1
Mixing time preseting, short & homogeneous
Exceptional sealing, powder lea ept free
Vertical or horizontal variety as optional
Complex Info:
| Model | Quantity (L) | Mixing Motor (kw) | Crushing Motor (kw) | Mixing Time (min) | All round Proportions (mm) |
| GHJ-twenty | twenty | .fifty five | .37 | three-five | seven-hundred*500*800 |
| GHJ-100 | a hundred | three | 1.five | 3-five | one thousand*600*900 |
| GHJ-200 | two hundred | 5.five | 3 | three-5 | 1500*900*1400 |
| GHJ-300 | 300 | seven.five | four | three-6 | 1800*900*1400 |
| GHJ-five hundred | five hundred | fifteen | 5.five | 4-6 | 1800*1300*1800 |
| GHJ-800 | 800 | 18.five | seven.five | 4-6 | 1900*1300*2000 |
| GHJ-one thousand | one thousand | 22 | 7.five | four-six | 2300*1400*2000 |
1.3 Double Cone Mixer:
This twin-cone mixer is composed of a rotating container with two cones and two stirrers. This equipment is applicable for powder coating, pharmaceutical, chemical, foodstuff, dyestuff, and other multi-compound supplies. It has exceptional impact in mixing powders and particles with relatively excellent fluidity. Its barrel is created of stainless metal, which is polished both inside of and outdoors, featuring gorgeous physical appearance and simple operation.
Technical Information:
| Model | Quantity (L) | Output (kg/tank) | Rotating Motor (kw) | Mixing Motor (kw) | Mixing Time (min) | All round Dimensions (mm) |
| SXH-a hundred | 300 | one hundred fifty | one.five | one.5 | -30 | 1760*830*2030 |
| SXH-two hundred | 400 | two hundred | one.five | one.5 | -30 | 1830*830*2150 |
| SXH-three hundred | 600 | 300 | 2.two | one.5 | -thirty | 1980*one thousand*2275 |
| SXH-500 | one thousand | five hundred | four | four | one-30 | 2630*1140*2620 |
| SXH-one thousand | 2000 | 1000 | five.five | 5.5 | -thirty | 3060*1440*2860 |
| SXH-1500 | 3000 | 1500 | seven.5 | 7.five | -thirty | 3700*2000*2970 |
| SXH-2000 | 4000 | 2000 | 8.5 | 8.5 | -thirty | 3800*2500*3500 |
two. Twin-Screw Extruder
two.1 Higher torque & Large Speed Rotation Twin-Screw Extruder:
Primary Functions:
*Entire Gearbox from professional EPT maker, reduced noise, resilient longevity
*Higher screw speed, large shearing, swift discharge
*Unbiased lube oil cooling technique layout
*Torque limiter to defend the generate train
*Suited for reclaim powder, unique powder production
*Split layout of barrel and liner inserts for effortless cleaning and maintainence
*Best & Side feeding possibilities
*Other attributes very same as typical variety extruder
Technological Parameters:
| Design | Potential (kg/h) | Screw Diameter (mm) | Screw Length (mm) | Screw Speed (r/min) | Main Motor (kw) | Feeder Motor (kw) | Heating Electrical power (kw) | All round Dimensions (mm) |
| TSX-40 | 80-260 | 40 | 16D | -800 | 11/15/eighteen.five | .55 | 8 | 1850*700*1750 |
| TSX-52 | one hundred fifty-450 | 52 | 16D | -800 | 22/30/37 | .seventy five | ten | 2700*900*2200 |
| TSX-65 | 400-one thousand | sixty five | 16D | -800 | 45/55/75 | 1.one | twelve | 2900*a thousand*2400 |
| TSX-75 | 800-1200 | seventy five | 16D | -800 | seventy five/ninety | one.5 | 16 | 3100*1200*2500 |
| TSX-eighty five | 1200-1800 | eighty five | 16D | -800 | ninety/one hundred ten | two.2 | twenty | 3700*1500*2900 |
two.2 Traditional Variety Co-Rotation Parallel Twin Screw Extruder
Functions:
*Sturdy shearing, straightforward cleaning
*Exact automobile temperature control, high cooling & heating exchagne
*Hinged clamshell sort barrel opening, segmented liners for easy changing and cost preserving
*Feeder simple assembly & disassembly, internal construction to stay away from agglomeration
*Configurable screw applied for defferent powder formulation
*Screw and barrel adopt specific resources like Cr12MoV, CPM, and so on., higher wearing resisting
*Very gearbox with minimal noise dB level
*Torque limiter to safeguard the push teach
*Minimal energy consumption
Technical Parameters:
| Product | Capability (kg/h) | Screw Diameter (mm) | Screw Duration | Screw Speed (r/min) | Principal Motor (kw) | Feeder Motor (kw) | Heating Energy (kw) | Overall Proportions (mm) |
| SLJ-forty | 80-220 | forty | 16D | -five hundred | 11/fifteen/18.5 | .fifty five | four | 1800*600*1700 |
| SLJ-50 | 150-300 | fifty | 16D | -500 | 22/30 | .seventy five | eight | 2600*seven-hundred*2000 |
| SLJ-55 | 300-400 | 55 | 16D | -500 | 30/37 | .75 | 8 | 2700*900*2300 |
| SLJ-sixty | four hundred-600 | sixty | 16D | -500 | forty five | one.one | 12 | 2750*one thousand*2350 |
| SLJ-seventy five | 600-800 | 75 | 16D | -500 | 55 | 1.5 | 12 | 2900*1100*2400 |
| SLJ-eighty | 800-1200 | eighty | 16D | -500 | 75/ninety | 2.two | 20 | 3700*800*2800 |
two.3 Lab Type Extruder
Specialized Parameters:
| Model | Ability (kg/h) | Screw Diameter (mm) | Screw Size | Screw Pace (r/min) | Main Motor (kw) | Feeder Motor (kw) | Heating Electrical power (kw) | Overall Dimensions (mm) |
| TSX-20 | .2-ten | 22 | 16D | -600 | two.2-four | .one | two | 1600*three hundred*850 |
| SLJ-30 | one-30 | 30 | 16D | -500 | three-5.5 | .eighteen | three.2 | 1430*550*1300 |
| SLJ-32 | 40-80 | 32 | 16D | -500 | seven.5/eleven | .twenty five | 3.2 | 1600*five hundred*1500 |
three Cooling Belt
three.1 H2o Cooled Cooling Belt with Flaker:
Features:
Consistent top quality imported steel belt
Base cooling water spraying program, put in heating and cooling device
Geared up with manual device to keep away from deforming
Far better cooling end result, larger successful efficiency
Few servicing and easy cleansing
Chips thickness and roller speed adjustable
Crusher with finger pin and enamel type
Minimized cross contamination, straightforward procedure
Complex Parameters:
| Model | Roller Dia. (mm) | Belt Width (mm) | Belt Size (mm) | Travel Motor (kw) | Ability (kg/h) | Cooling Manner | General Dimensions (mm) |
| GDY-406 | 220 | 600 | 4000 | one.5 | two hundred-four hundred | Cooled Water | 4000*750*1600 |
| GDY-508 | 325 | 800 | 5000 | 3 | four hundred-five hundred | Cooled Water | 5000*900*1800 |
| GDY-510 | 325 | 1000 | 5000 | 3 | 500-700 | Cooled Drinking water | 5000*1100*1900 |
| GDY-610 | 440 | 1000 | 6000 | four | 600-800 | Cooled Drinking water | 6000*1100*1900 |
| GDY-612 | 440 | 1200 | 6000 | four | seven-hundred-900 | Cooled H2o | 6000*1400*1900 |
| GDY-712 | 600 | a thousand | 7000 | five.5 | 900-1200 | Cooled Water | 7000*1400*2000 |
3.2 Air Cooled Variety Caterpillar Cooling Belt with Flaker:
Characteristics:
Stainless steel produced caterpillar, air cooling
Flake chips thichness and conveying speed adjustable
Sensible design for cooling rollers inside, professional surface area remedy to keep away from h2o lea ept and rust
Mounted with simplified air conditioning system
Secure procedure, like crisis button, clockwise and counter-clockwise rotation.
Specialized Parameters:
| Model | Roller Dia. (mm) | Belt Width (mm) | Belt Size (mm) | Travel Motor (kw) | Blower Motor (kw) | Capacity (kg/h) | Cooling Mode | General Dimensions (mm) |
| JFY-204 | a hundred and sixty/a hundred and sixty | 400 | 2000 | .55 | two hundred-400 | thirty-one hundred | Chilled H2o&Air | 2000*450*900 |
| JFY-406 | a hundred and sixty/220 | 600 | 4000 | .75 | 400-five hundred | a hundred-220 | Chilled H2o&Air | 4000*850*950 |
| JFY-508 | a hundred and eighty/325 | seven hundred | 5000 | .seventy five | 500-700 | 220-four hundred | Chilled H2o&Air | 5000*1050*1200 |
| JFY-510 | a hundred and eighty/325 | 800 | 5000 | one.one | 600-800 | four hundred-five hundred | Chilled Water&Air | 5000*1150*1200 |
| JFY-610 | 180/325 | 800 | 6000 | 1.1 | 700-900 | 500-700 | Chilled Water&Air | 6000*1150*1200 |
| JFY-710 | 180/325 | a thousand | 6000 | 1.5 | 900-1200 | 600-900 | Chilled Drinking water&Air | 7000*1250*1450 |
| JFY-812 | a hundred and eighty/325 | a thousand | 7000 | 2.two | 900-1200 | 900-1200 | Chilled H2o&Air | 8000*1650*1600 |
3.3 PU Variety Air Cooled Cooling Belt
Attributes:
Adjustable thichness and roller speed
Air cooled to steer clear of cross contamination
Roller and crusher outfitted with overload security
High efficiencies
1 piece PU belt to faciliate easy cleaning and servicing
Compact style for constrained space
Technological Parameters:
| Product | Roll Dia. (mm) | Band Width (mm) | Band Length (mm) | Motor Energy (kw) | Throughput (kg/h) | Dimensions (mm) |
| PFY-104 | 156 | four hundred | a thousand | one.1 | 50 | 1000*870*1050 |
| PFY-206 | 220 | 600 | 2000 | one.1 | a hundred and fifty | 2000*1150*1100 |
| PFY-208 | 445 | 800 | 2000 | two.2 | 300 | 2000*1100*1100 |
| PFY-210 | 445 | a thousand | 2000 | two.two | 500 | 2000*1300*1100 |
| PFY-310 | 622 | a thousand | 3000 | 2.2 | 800 | 2000*1300*1200 |
four ACM (Air Classifier Mill) Grinding System
Attributes:
Safety in accordance with EU explosion resistant normal ATEX/PSR11
Lower sound style (from mill to supporter system)
Particle measurement distribution adjustable on request
Mill body temperature and air intake volume monitoring
Rotary sieve with special style and resilient for mesh put on situation
Complete grinding technique developed for powder dust free of charge
Concluded powder goods with far more than 98 %
Large output, simple operation cleaning and maintenance
Technological Parameters:
| Model | Mill Motor kw | Rotor rpm | Classifier Motor | Classifier rpm | Fan kw | Air cbm/h | Capability kg/h | Overall proportions mm |
| ACM-02 | two.2 | 12000 | .37 | -3000 | three | 350 | two-30 | 1430*550*1300 |
| ACM-05 | four | 11000 | .75 | -3000 | 4 | 800 | thirty-80 | 2100*one thousand*2150 |
| ACM-10 | 7.5 | 7000 | one.5 | -3000 | eleven | 2500 | 100-260 | 6200*1250*3200 |
| ACM-15 | eleven | 7000 | one.5 | -3000 | fifteen | Lugs (tabs) on the exterior diameter of the FRICTION DISCS in shape into corresponding slots in the SLEEVE. The inside diameter of the Generate DISCS are linked to the Push HUB by means of equipment enamel or other push geometries. The SLEEVE contains a precision machined pilot on to which a sprocket, pulley, sheave, coupling or adapter can be attached.3000 | two hundred-350 | 6500*1300*3300 |
| ACM-20 | fifteen | 6600 | two.2 | -3000 | 22 | 3500 | three hundred-four hundred | 7500*1300*3600 |
| ACM-thirty | 22 | 5500 | three | -3000 | thirty | 4500 | 400-550 | 7900*1500*3600 |
| ACM-forty | thirty | 4600 | 5.5 | -3000 | 37 | 5500 | 600-800 | 8000*1700*3600 |
| ACM-50 | 37 | 4000 | seven.5 | -3000 | forty five | 6500 | one thousand-1200 | 9000*1900*3900 |
| ACM-sixty | forty five | 3500 | 7.five | -3000 | fifty five | 8000 | 1200-1600 | 9000*2000*4000 |
Organization:
Xihu (West Lake) Dis.sunlight is a foremost company in China of Powder Coating Generation Equipments, i.e. Mixers, Extruders, Cooling Belt and Air Classifier Mill. We inherit 30 several years of encounters in this ept and have exported to almost 30 nations and locations in the previous ten a long time, and earn commonly great reputations.
We passed CE certification approval and ATEX explosion resistant take a look at, and many others. intercontinental expectations, we do know how to meet up with the diversified and personalized made requests of our customers.
Our everlasting business philosophy: consistant good quality, powerful communication, accountable services.
The use of authentic gear manufacturer’s (OEM) element figures or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating item use and compatibility. Our organization and the listed alternative components contained herein are not sponsored, accredited, or produced by the OEM.
