We – EPG Group the biggest gearbox & motors , torque limiter couplings and gears factory in China with 5 diverse branches. For far more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

70 ton mobile truck crane QY70K-I

The characteristics of Truck Crane QY70K-I:
The modern jib method adopts embedded block, plug-in increase head and intercontinental sophisticated U section jib, which has excellent lifting performance and secure and trustworthy lifting perform.
Eight patent tactics make sure the smooth, substantial performance and strength conservation of the lifting, rotation, and luffing programs.
The torque limiter adopts colourful Liquid crystal display display, recognizing the intelligence of the failure diagnosis. The precision is ahead of the business.
The humanity design tends to make the taxi and manage taxi a lot more spacious, and easy to work.
6 special producing systems guarantee the higher good quality.
The wor ept situation expands twice. Recently insert 5t counterweight.

Dimension	Unit	QY70K-I
General size	mm	13930
General width	mm	2800
Total height	mm	3575
Weight
Total weight in travel	kg	43000(without 1t vice counterweight)
Front axle load	kg	17000
Rear axle load	kg	26000
Electrical power
Engine product		WD615.338(domestic III)
Engine rated power	kW/(r/min)	276/2200
Engine rated torque	N.m/(r/min)	1500/1400
Vacation
Max. vacation speed	km/h	eighty
Min. turning diameter	m	24
Min. floor clearance	mm	327
Approach angle	°	19
Departure angle	°	13
Max. quality potential	%	40
Fuel usage for 100km	L	45
Main performance
Max. rated overall lifting capability	t	70
Min. rated wor ept radius	m	3000
Turning radius at turntable tail	m	3.fifty five
Max. lifting torque	kN.m	2303
Foundation growth	m	eleven.6
Completely extended boom	m	forty four.five
Fully extended boom+ jib	m	fifty nine.5
Longitudinal outrigger Mechanical overload defense devices like the Tsubaki Torque Limiter can assist decrease the risk of critical ingredient failure.span	m	6.one
Lateral outrigger span	m	seven.3
Wor ept velocity
Boom luffing time	s	sixty
Increase total extension time	s	≤150
Max. swing pace	r/min	≥2.
Max. pace of main winch (one rope) (no load)	m/min	≥130
Max. velocity of aux. winch (solitary rope) (no load)	m/min	≥108

 

The use of authentic gear manufacturer’s (OEM) element figures or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our organization and the outlined substitute areas contained herein are not sponsored, accredited, or created by the OEM.

We – EPG Team the most significant gearbox & motors , torque limiter couplings and gears factory in China with 5 distinct branches. For far more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

1. Mixers:

one.1 Computerized Container Mixer

Computerized container mixer is wor ept with continuous substance trolleys, the container fills the materials and lifted up and connnected tightly with mixing head immediately. The mixing head tilts with each other with the containers, and then get the homogeneous mixing consequence, following ending mixing as for each placing time, and return to authentic place, the complete process will be managed by PLC

Principal Features:

Numerous detachable containers for circular operation
High efficiency
Adopting PLC to recognize automation
Homogenized combination
No curing granule
Convenient for cleaning and maintenance
Secure and relaiable operation

Technological Data:
 

Design	Quantity (L)	Output (kg/tank)	Mixing Motor (kw)	Tilting Motor (kw)	Crushing Motor (kw)	Mixing Time (min)	Control Manner	All round Dimensions (MM)
FHJ-fifteen	fifteen	8	1.five			five-ten	PLC	750*480*950
FHJ-120	a hundred and twenty	60	5.5	.two		5-10	PLC	1800*1800*1950
FHJ-150	a hundred and fifty	70	5.five	.37	2.2	5-10	PLC	2150*1100*2300
FHJ-three hundred	300	a hundred and fifty	fifteen	3	two.2	5-10	PLC	2150*1100*2300
FHJ-600	600	300	22	four	4	five-ten	PLC	2650*1250*2700
FHJ-one thousand	a thousand	five hundred	30	four	four	five-ten	PLC	2900*1550*3100
FHJ-2000	2000	a thousand	45	5.5	five.5	5-ten	PLC	3500*2350*3650

1.2 High Velocity Pre-Mixer:

Functions:

Substantial efficiency & easy operation

Simple colour altering, secure cleansing

Blended mixing & crushing as one

Mixing time preseting, limited & homogeneous

Superb sealing, powder lea ept free

Vertical or horizontal type as optional

Complex Knowledge:
 

Product	Volume (L)	Mixing Motor (kw)	Crushing Motor (kw)	Mixing Time (min)	Total Dimensions (mm)
GHJ-twenty	twenty	.fifty five	.37	three-five	seven-hundred*500*800
GHJ-a hundred	one hundred	3	1.5	3-five	1000*600*900
GHJ-two hundred	two hundred	five.5	three	3-5	1500*900*1400
GHJ-three hundred	three hundred	seven.5	four	three-6	1800*900*1400
GHJ-five hundred	five hundred	15	five.5	four-six	1800*1300*1800
GHJ-800	800	eighteen.five	7.5	4-6	1900*1300*2000
GHJ-one thousand	a thousand	22	7.five	4-six	2300*1400*2000

one.3 Double Cone Mixer:

This twin-cone mixer is composed of a rotating container with two cones and two stirrers. This machine is applicable for powder coating, pharmaceutical, chemical, foodstuff, dyestuff, and other multi-compound resources. It has impressive result in mixing powders and particles with comparatively good fluidity. Its barrel is created of stainless metal, which is polished both inside of and outside the house, featuring beautiful appearance and straightforward operation.

Technological Data:
 

Model	Volume (L)	Output (kg/tank)	Rotating Motor (kw)	Mixing Motor (kw)	Mixing Time (min)	All round Dimensions (mm)
SXH-one hundred	300	150	1.five	one.5	-thirty	1760*830*2030
SXH-two hundred	four hundred	200	one.five	1.five	-30	1830*830*2150
SXH-300	600	three hundred	two.two	1.5	-thirty	1980*1000*2275
SXH-500	a thousand	500	4	4	one-30	2630*1140*2620
SXH-1000	2000	1000	five.5	5.five	-thirty	3060*1440*2860
SXH-1500	3000	1500	7.five	7.5	-30	3700*2000*2970
SXH-2000	4000	2000	8.5	8.5	-thirty	3800*2500*3500

2. Twin-Screw Extruder

2.1 Higher torque & Large Velocity Rotation Twin-Screw Extruder:

Principal Attributes:

*Full Gearbox from skilled EPT maker, reduced noise, durable longevity

*High screw velocity, substantial shearing, quick discharge

*Impartial lube oil cooling system design

*Torque limiter to shield the drive prepare

*Suitable for reclaim powder, special powder manufacturing

*Split design of barrel and liner inserts for simple cleaning and maintainence

*Best & Side feeding choices

*Other functions exact same as typical type extruder

Specialized Parameters:
 

Product	Capability (kg/h)	Screw Diameter (mm)	Screw Duration (mm)	Screw Velocity (r/min)	Principal Motor (kw)	Feeder Motor (kw)	Heating Energy (kw)	Total Proportions (mm)
TSX-40	80-260	40	16D	-800	11/fifteen/eighteen.five	.55	eight	1850*700*1750
TSX-fifty two	a hundred and fifty-450	52	16D	-800	22/thirty/37	.seventy five	ten	2700*900*2200
TSX-65	400-one thousand	65	16D	-800	forty five/55/seventy five	one.1	12	2900*one thousand*2400
TSX-seventy five	800-1200	75	16D	-800	seventy five/90	1.5	sixteen	3100*1200*2500
TSX-85	1200-1800	85	16D	-800	ninety/one hundred ten	2.two	20	3700*1500*2900

2.2 Conventional Variety Co-Rotation Parallel Twin Screw Extruder

Attributes:

*Powerful shearing, simple cleaning

*Precise vehicle temperature handle, large cooling & heating exchagne

*Hinged clamshell variety barrel opening, segmented liners for easy changing and expense saving

*Feeder effortless assembly & disassembly, internal structure to keep away from agglomeration

*Configurable screw applied for defferent powder formulation

*Screw and barrel adopt unique components like Cr12MoV, CPM, and many others., substantial sporting resisting

*Quite gearbox with reduced noise dB amount

*Torque limiter to defend the travel practice

*Low power usage

Technological Parameters:
 

Product	Capacity (kg/h)	Screw Diameter (mm)	Screw Size	Screw Pace (r/min)	Principal Motor (kw)	Feeder Motor (kw)	Heating Electricity (kw)	Total Proportions (mm)
SLJ-forty	eighty-220	40	16D	-500	11/fifteen/eighteen.five	.fifty five	4	1800*600*1700
SLJ-fifty	a hundred and fifty-300	50	16D	-500	22/thirty	.75	eight	2600*seven-hundred*2000
SLJ-55	300-four hundred	fifty five	16D	-five hundred	thirty/37	.75	eight	2700*900*2300
SLJ-sixty	four hundred-600	60	16D	-500	45	one.one	12	2750*a thousand*2350
SLJ-75	600-800	seventy five	16D	-five hundred	fifty five	one.5	12	2900*1100*2400
SLJ-80	800-1200	eighty	16D	-five hundred	seventy five/ninety	2.two	twenty	3700*800*2800

2.3 Lab Variety Extruder

Technical Parameters:
 

Design	Potential (kg/h)	Screw Diameter (mm)	Screw Duration	Screw Speed (r/min)	Major Motor (kw)	Feeder Motor (kw)	Heating Electrical power (kw)	General Dimensions (mm)
TSX-twenty	.2-ten	22	16D	-600	two.2-4	.one	two	1600*300*850
SLJ-30	one-thirty	30	16D	-five hundred	three-5.five	.eighteen	3.2	1430*550*1300
SLJ-32	40-eighty	32	16D	-five hundred	seven.5/eleven	.twenty five	three.2	1600*500*1500

three Cooling Belt

3.1 H2o Cooled Cooling Belt with Flaker:

Features:

Constant top quality imported steel belt

Bottom cooling h2o spraying system, set up heating and cooling system

Equipped with guide unit to steer clear of deforming

Far better cooling outcome, higher successful productiveness

Handful of maintenance and effortless cleansing

Chips thickness and roller speed adjustable

Crusher with finger pin and tooth type

Minimized cross contamination, easy procedure

Technological Parameters:
 

Product	Roller Dia. (mm)	Belt Width (mm)	Belt Size (mm)	Push Motor (kw)	Ability (kg/h)	Cooling Method	All round Proportions (mm)
GDY-406	220	600	4000	1.5	two hundred-400	Cooled H2o	4000*750*1600
GDY-508	325	800	5000	three	400-500	Cooled H2o	5000*900*1800
GDY-510	325	one thousand	5000	3	500-700	Cooled H2o	5000*1100*1900
GDY-610	440	a thousand	6000	4	600-800	Cooled H2o	6000*1100*1900
GDY-612	440	1200	6000	four	seven hundred-900	Cooled Water	6000*1400*1900
GDY-712	600	1000	7000	five.five	900-1200	Cooled Water	7000*1400*2000

3.2 Air Cooled Sort Caterpillar Cooling Belt with Flaker:

Characteristics:

Stainless steel created caterpillar, air cooling

Flake chips thichness and conveying speed adjustable

Reasonable design for cooling rollers inside, skilled area treatment method to steer clear of drinking water lea ept and rust

Set up with simplified air conditioning unit

Risk-free procedure, like unexpected emergency button, clockwise and counter-clockwise rotation.

Technological Parameters:
 

Design	Roller Dia. (mm)	Belt Width (mm)	Belt Size (mm)	Push Motor (kw)	Blower Motor (kw)	Capacity (kg/h)	Cooling Mode	Overall Proportions (mm)
JFY-204	one hundred sixty/one hundred sixty	400	2000	.fifty five	two hundred-four hundred	30-100	Chilled Water&Air	2000*450*900
JFY-406	a hundred and sixty/220	600	4000	.75	four hundred-five hundred	one hundred-220	Chilled H2o&Air	4000*850*950
JFY-508	one hundred eighty/325	700	5000	.seventy five	500-700	220-400	Chilled Drinking water&Air	5000*1050*1200
JFY-510	180/325	800	5000	one.one	600-800	400-five hundred	Chilled Water&Air	5000*1150*1200
JFY-610	a hundred and eighty/325	800	6000	1.1	seven hundred-900	500-seven hundred	Chilled H2o&Air	6000*1150*1200
JFY-710	one hundred eighty/325	one thousand	6000	1.5	900-1200	600-900	Chilled H2o&Air	7000*1250*1450
JFY-812	a hundred and eighty/325	a thousand	7000	two.two	900-1200	900-1200	Chilled Drinking water&Air	8000*1650*1600

three.3 PU Kind Air Cooled Cooling Belt

Characteristics:

Adjustable thichness and roller velocity

Air cooled to stay away from cross contamination

Roller and crusher equipped with overload defense

Higher efficiencies

One particular piece PU belt to faciliate straightforward cleansing and maintenance

Compact design for restricted place

Technological Parameters:
 

Product	Roll Dia. (mm)	Band Width (mm)	Band Size (mm)	Motor Power (kw)	Throughput (kg/h)	Proportions (mm)
PFY-104	156	four hundred	a thousand	1.1	50	one thousand*870*1050
PFY-206	220	600	2000	one.1	150	2000*1150*1100
PFY-208	445	800	2000	2.2	300	2000*1100*1100
PFY-210	445	1000	2000	2.two	five hundred	2000*1300*1100
PFY-310	622	one thousand	3000	two.two	800	2000*1300*1200

4 ACM (Air Classifier Mill) Grinding Technique

Features:

Security in accordance with EU explosion resistant regular ATEX/PSR11

Reduced sound style (from mill to admirer program)

Particle dimension distribution adjustable on request

Mill human body temperature and air ingestion volume checking

Rotary sieve with special layout and sturdy for mesh dress in concern

Whole grinding technique made for powder dust free of charge

Completed powder products with more than 98 p.c

Large output, straightforward procedure cleaning and maintenance

Technical Parameters:
 

Model	Mill Motor kw	Rotor rpm	Classifier Motor	Classifier rpm	Admirer kw	Air cbm/h	Capacity kg/h	General proportions mm
ACM-02	two.two	12000	.37	-3000	three	350	2-thirty	1430*550*1300
ACM-05	four	11000	.seventy five	-3000	4	800	thirty-80	2100*one thousand*2150
ACM-10	7.five	7000	one.5	-3000	eleven	2500	a hundred-260	6200*1250*3200
ACM-15	11	7000	1.5	-3000	15	3000	two hundred-350	6500*1300*3300
ACM-20	fifteen	6600	2.2	-3000	22	3500	three hundred-four hundred	7500*1300*3600
ACM-30	22	5500	three	-3000	30	4500	400-550	7900*1500*3600
ACM-forty	thirty	4600	five.five	-3000	37	5500	600-800	8000*1700*3600
ACM-50	37	4000	7.five	-3000	45	6500	a thousand-1200	9000*1900*3900
ACM-60	45	3500	7.five	-3000	55	8000	1200-1600	9000*2000*4000

CompHow Torque Benefit is Determined The torque worth of a Zero-Max Torq-Tender is determined by the force of the springs that are mounted in the device. The spring drive functions upon slides that are portion of the internal shaft these slides transmit force that retains the push important in its engagement slot in the outer housing. any:

Xihu (West Lake) Dis.sun is a top producer in China of Powder Coating Manufacturing Equipments, i.e. Mixers, Extruders, Cooling Belt and Air Classifier Mill. We inherit 30 several years of ordeals in this ept and have exported to nearly thirty international locations and regions in the past ten years, and win extensively very good reputations.

We handed CE certification acceptance and ATEX explosion resistant examination, and so forth. intercontinental standards, we do know how to fulfill the diversified and personalized manufactured requests of our clients.

Our everlasting company philosophy: consistant high quality, efficient conversation, liable service.

The use of original equipment manufacturer’s (OEM) component numbers or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our business and the listed substitution elements contained herein are not sponsored, approved, or created by the OEM.

We – EPG Team the most significant gearbox & motors , torque limiter couplings and gears manufacturing facility in China with 5 distinct branches. For much more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

EPT Heacy Truck Crane 50T Crane Truck ZTC500H552   

ZTC500H5522 truck crane is a new era of high-performance products independently designed by our firm to meet industry need and integrate many years of experience and superior technological innovation. The functionality parameters this sort of as lifting peak, major increase size, wor ept velocity and lifting potential of the crane are at the present international leading degree.

The product is a full-slewing, telescopic increase-variety, hydraulic-managed proportional-managed truck crane. It adopts the firm’s self-made entire-push four-bridge unique chassis. It has a wide field of vision, lavish decoration and comfort and ease, 8×4 push, hydraulic electricity steering, and mild bodyweight. flexible.

 

The solution adopts the most recent hydraulic control proportional directional manage valve and variable pump plus gear pump technique, which makes the wor ept ability of every actuator fully exerted, and the hydraulic manage pilot take care of is operated, which can comprehend the primary and auxiliary lifting, variable amplitude, rotation and telescopic mechanisms.

 

The blended motion among the two drastically increases the efficiency of the crane. It has the traits of mild and adaptable operation, secure and trustworthy function, stepless velocity regulation and so on. In the hydraulic system, basic safety units such as overflow valve, stability valve, hydraulic lock and brake valve are provided to avert oil passage overload and stay away from accidents brought on by oil pipe rupture.

 

The crane is outfitted with a assortment of protection devices such as a torque limiter and a complete lighting method to ensure safe and trustworthy procedure and straightforward night time work.

The merchandise is novel in shape, with a beautiful physique, a beautiful line and a beautiful coloration.

Specification

Merchandise	Unit	Parameter
Max. lifting fat	ton	fifty
Max. lifting power in foundation arm	kN.m	1813
Max. lifting power in longest foundation arm	kN.m	1082
Max. lifting top in foundation arm	m	12.six
Max. lifting top in principal arm	m	45.five
Max. lifting top in auxiliary boom	m	sixty one
Max. velocity in one-rope(primary winding)	m/min	one hundred thirty five
Max. pace in one-rope(auxiliary winding)	m/min	125
Arm lifting time	s	50
Arm streching time	s	110
·         Swing pace	r/min	-22
Max. using altitude	m	2000
Max. touring pace	Km/h	80
Gradeability	%	44
Min. turning diameter	m	24
·         Min. Floor Clearance	mm	280
·         Oil use per kilometre	L	41
All round weight in touring state	kg	41600
Total fat	kg	41405
Front axle shaft load	kg	15600
Rear axle shaft load	kg	26000
General proportions(size*width*top)	mm	14100*2650*3800
Cross leg length	m	seven.4
Length of legs lengthwise	m	6.05
Tail radius	mm	3890
Main boom size	m	11.6-forty five
Main increase elevation angle	m	-2-80
Auxiliary boom duration	m	nine.5  sixteen
Auxiliary increase installation angle	°	/15/thirty

Comprehensive Photos

Why Select Us

 

The use of first gear manufacturer’s (OEM) part figures or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our company and the listed alternative parts contained herein are not sponsored, authorized, or manufacturedIdeally the torque limiter need to be positioned as near as feasible to the supply of the jam. This will permit the program inertia and torque to be speedily and successfully disconnected from the jammed area. The technique can then be authorized to coastline to a stop with out causing additional device damage. A mechanical torque limiter will offer faster reaction occasions and better defense than typical electronic methods at substantial crash charges. by the OEM.

We – EPG Group the biggest gearbox & motors , torque limiter couplings and gears manufacturing unit in China with 5 various branches. For a lot more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

The ten positive aspects of DaHan tower crane 

1. With 56,000 sets of market place quantity and exceptional popularity, EPT tower crane ranks the very first place in China tower crane ept in the past decades. EPT always adheres to the benefit that supply the most beneficial tower crane and support for the buyer, with the greatest expense functionality in the market. 

 
 

2. EPT tower crane owns the major technology R&D team, the product top quality handed a number of experiments with rigorous testing. Normally, EPT has 16 several years of generation engineering and wealthy activities in high quality administration. Till now, in excess of one hundred nationwide technological innovation patents of tower crane have been set into use currently.
 

three.In purchase to promise the trustworthiness of tower crane good quality and reduce the cost, all uncooked supplies are directly equipped by renowned manufacturers like Baosteel and Wisco. Raw components for principal elements such as standard area primary limbs, tower caps adopt Q345B metal, as a result the tensile energy improved by 30% and the tower crane gets to be a lot more risk-free and reputable. 
 

 
four. EPT tower crane is the company which to begin with began to use the robotic welding strains. At present, we have a fully automatic robotic welding production line for mast sections fabricaXG Series Twin screw extruders and compounding devices call for the extremely very best torque overload safety. Rexnord’s Autogard XG Collection delivers functions with the specific intention of safeguarding extruders from damages triggered by unforeseen torque spikes.tion manufactured up by much more than one hundred welding robots. The manufacturing line is composed with automated material planning, welding and maching. All principal parts of EPT tower crane use robot welding, with the most ept carbon dioxide blended with argon fuel shielded welding, it has deep depth of fusion, high good quality of welding and stable efficiency.

 

five. All areas and parts of EPT tower crane use premium makes. Electric powered products with Schneider converter, aviation plug, stainless metal distribution box and three linkage console has features of low failure price and effortless set up.
Hoisting system is provided by leading maker Jiangte Motor or HangZhou Shengjian, all with engine oil, totally free upkeep, substantial trustworthiness and minimal servicing fee.
Slewing support uses HangZhou Fangyuan manufacturer or Rothe Erde brand name, twice tempering processing makes more efficiently operation and for a longer time tower crane provider daily life.

 

6. Interest to depth high quality.  High-strength bolt undertake shipborne scale DACROMET technologies. It can preserve not rusted for 10 years .Swiss screw-thread bolts of preload advertise 30 % than standard bolts. Bodyweight limiter uses the pressure ring composition and forged aluminum shell used Hoisting, derric ept restricting stopper to increase services life.

 

 
7.Massive constructions as mast part, change capable, top package and hoisting jib adopt innovative equipment as NC machine resource, drilling equipment, milling equipment processing after welding. That successfully guarantees products assembly precision, reducing the failure charge and enhancing the security.
 
 

8.twelve automatic spraying assembly line, the entire equipment adopt impeller blasting to make sure the cleanliness of metal surface and eliminate the interior stress producing in welding approach, boost the energy and metal area hardness, increase portray adhesion. Two primer, a paint spraying technologies, gorgeous physical appearance, corrosion resistance has increased a lot more than twice than the daily life of ordinary spraying process. System, the tiny car, fence and other little pieces adopt sizzling dip galvanized soon after acid phosphate therapy, rust resistance more powerful.

 

9.Hoisting, derric ept and slewing mechanism, with complete security these kinds of as torque, weight restrict. The steel wire rope broken rope gadget. Variety of the automobile design towards decline and broken shaft, these kinds of as tilting gadget. The electrical adopts overload security, the design of PLC self-prognosis technique, it’s handy to maintenance.

 

 
ten. EPT 3 manufacturing bases is ZheJiang , ZheJiang , ZheJiang . EPT tower crane are exported to more than fifty nations around the world and regions. We have a lot more than 1000 sets soon after-product sales service network. We carried out the earliest stagnation point support manner in this tower crane ept that guarantee the good quality of service and effectiveness. Otherwise, greater to take away customer’s concerns.
 
 

 
Associated tower crane model specs

Product	Max load	Jib duration	Free of charge standing top	Idea load	Mast section measurement
QTZ50(4810)	4t	48m	29m	1t	one.5×1.5×2.2m
QTZ50(5008)	4t	50m	29m	.8t	one.5×1.5×2.2m
QTZ63(5013)	5t	50m	38m	1.3t	one.5×1.5×2.5m
	5t	50m	38m	1.3t	one.6×1.6×2.5m
	5t	50m	42.5m	one.3t	1.6×1.6×2.8m
	6t	50m	40m	one.3t	1.6×1.6×2.5m
	6t	50m	42m	1.3t	1.6×1.6×2.8m
	5t	50m	36.5m	one.3t	1.2×1.2×3.0m
	6t	50m	44m	one.3t	1.2×1.2×3.0m
QTZ80(5610)	6t	56m	42m	1.0t	1.6×1.6×2.8m
	6t	56m	44m	1.0t	one.2×1.2×3.0m
QTZ80(5612)	6t	56m	40m	1.2t	1.6×1.6×2.8m
QTZ80(5613)	6t	56m	42m	1.3t	one.6×1.6×2.8m
	6t	56m	44m	1.3t	1.2×1.2×3.0m
QTZ80(6571)	6t	60m	40m	1.0t	1.6×1.6×2.8m
	6t	60m	45m	one.0t	one.8×1.8×2.8m
	6t	60m	44m	1.0t	1.2×1.2×3.0m
QTZ80(6012)	6t	60m	40m	1.2t	1.6×1.6×2.8m
	6t	60m	45m	1.2t	one.8×1.8×2.8m
	6t	60m	44m	one.2t	1.2×1.2×3.0m
QTZ100(6013)	6t	60m	40m	one.3t	one.6×1.6×2.8m
	8t	60m	45m	one.3t	one.8×1.8×2.8m
	8t	60m	44m	1.3t	one.2×1.2×3.0m
QTZ125(6513)	6t	65m	45m	1.3t	1.8×1.8×2.8m
	8t	65m	45m	1.3t	one.8×1.8×2.8m
QTZ125(6015)	8t	60m	45m	one.5t	2.0×2.0×3.0m
	10t	60m	45m	1.5t	one.8×1.8×2.8m
	10t	60m	44m	1.5t	1.6×1.6×3.0m
	10t	60m	60m	one.5t	two.0×2.0×3.0m
QTZ160(6571)	10t	60m	fifty nine.7m	two.4t	2.0×2.0×3.0m
	10t	60m	sixty four.7m	two.4t	2.0×2.0×3.0m
QTZ160(6516)	8t	65m	50m	1.6t	1.6×1.6×3.0m
	8t	65m	50m	one.6t	1.8×1.8×2.8m
QTZ200(6520)	10t	65m	fifty nine.7m	2.0t	2.0×2.0×3.0m
	10t	65m	64.7m	2.0t	two.0×2.0×3.0m
	10t	65m	53.5m	2.0t	two.0×2.0×3.0m
QTZ250(7571)	12t	70m	59.7m	2.1t	two.0×2.0×3.0m
QTZ250(7571)	12t	70m	fifty nine.7m	two.5t	two.0×2.0×3.0m
QTZ250(7032)	12t	70m	52.5m	three.2t	two.0×2.0×3.0m
	12t	70m	57.5m	3.2t	two.0×2.0×3.0m
	12t	70m	38.8m	3.2t	2.0×2.0×3.0m
QTZ250(7571)	16t	70m	52.5m	two.7t	two.0×2.0×3.0m
	16t	70m	38.8m	two.7t	2.0×2.0×3.0m
QTZ315(7530)	16t	75m	fifty two.5m	three.0t	two.0×2.0×3.0m
QTZ500(8522)	25t	85m	73m	two.2t	2.5×2.5×5.95m

 
Our Service   
                  
Pre-sale Services

1. We can customise goods according to client’s demand from customers. A variety of kinds of Design Hoist and Tower Crane for  your  choice.

two. Very good Good quality & Factory Price & Quick Response & Reliable Support are what we are making an attempt best to offer you.

3. All of our merchandise are made by our skilled workmen and we have higher efficiency revenue group, you can totally ept us.

4. We have more than 20 many years encounter in planning and production, we cherish each buy from our honored clients.

After your assortment

one. We will count least expensive shipping cost and make invoice to you at as soon as.

2. Examination each and every device ahead of supply to guarantee their top quality, then ship out to you following your payment.

Right after-sale Support

one. Our engineers are available to guidebook the operators overseas. 
two. We are very happy that buyer give us some suggestion for price and products.
three. If you have any query, please contact us freely by E-mail or Tel: +86~13083988828ephone

Speak to Me

If you are intrested in our tower crane,remember to come to feel free to contact me,we’d like to give the very best cost with you.
 
Tel: +86~13083988828: 86~13083988828 13858117778869138866
 
 

 
 
 

 
 

The use of authentic gear manufacturer’s (OEM) portion quantities or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating solution use and compatibility. Our business and the detailed substitute components contained herein are not sponsored, accredited, or created by the OEM.

We – EPG Team the most significant gearbox & motors , torque limiter couplings and gears manufacturing facility in China with 5 distinct branches. For much more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Our organization will supply you the substantial good quality merchandise with a lower price, quick shipping,and specialist following-sale services.
EPT  25ton Truck Crane for Sale of  2017 Calendar year Very hot Promoting New Cellular Crane(Qy25k)
[Item Description]
Far more versions for sale
· Leading performance: the increase length in full extension is 39.5m, the efficiency major in 5%. The grade ability is forty%, which make the equipment have great street adaptability.
· The distinctive U growth and plug-in growth head make the load-carrying potential far more balanced, and elevate a lot more efficiently.
· The unique extend and retract method helps prevent the misoperation the extend and retract of the growth is safer and far more reliable.
· The management program is optimized by 8 patents lifting, rotation, and luffing are straightforward and reliable.
· Six distinctive technologies source the good quality assurance, and make the products hold a substantial benefit.
· The progressive jib program adopts embedded block, plug-in increase head and octagon jib, which has superb lifting efficiency and risk-free and dependable lifting work.
· The unique extend and retract technique avoids the bend of the main pipe and cylinder and the split of the growth triggered by misoperation, bettering the basic safety of the functions.
· Eight patent strategies ensure the easy, higher performance and power conservation of the lifting, rotation, and luffing programs.
· Adopt the new hydraulic motor with massive torque starting point, ma ept the secondary lifting safer.
· The torque limiter adopts colourful Liquid crystal display screen, noticing the intelligence of the failure diagnosis. The precision is in advance of the market.
· The humanity design and style helps make the taxi and management taxi much more roomy, and simple to work.
· Six unique production systems ensure the substantial quality.

[Item Parameter]

Product			Device
Dimensions	Whole duration	12550	mm
	Overall width	2500	mm
	Total height	3380	mm
Weight	Functioning Fat	29400	Kg
	Entrance axle load	6200	Kg
	Rear axle load	23200	Kg
Power	Engine design	SC8DK280Q3/WD615.329/6CL280-2
	Motor power rankings	206/2200/ 213/2200 206/2200	Kw(r/min)
	Motor torque rankings	1112/1400 1160/1400 1170/1400	N.m(r/min)
Travel	Max.vacation diameter	seventy five	Km/h
	Min. turning diameter	22	m
	Min. ground clearance	260	mm
	Strategy angle	sixteen	.
	Departure angle	thirteen	.
	Max. grade ability	thirty	%
	Fuel use of 100km	37	L
Driving Parameters	Max. complete lifting ability	25	t
	Min. wor ept radius	3000	mm
	Turning  radius at swing table tail	3.065	m
	Max. lifting torque	one thousand	Kn.m
	Fundamental increase lifting size	ten.six	m
	Longest boom lifting duration with secondary arm	forty one.15	m
	Longest growth lifting duration	33	m
	Outrigger longitudinal length span	5.fourteen	m
	Outrigger lateral distance span	6	m
Wor ept velocity	Elevation length for secondary boom	seventy five	s
	Elevation duration for totally extended boom	a hundred	s
	Max. rotation velocity	≥2.five	r/min
	Max. pace for principal winch	≥120	m/min
	Max. speed  for auxiliary  winch	≥120	m/min

[Item Picture]

[Company Information]
Firm profile
EPT is a construction equipment manufacturer with over 70 years of experience. Over the a long time, we have grown to turn out to be the world’s most complete design machinery maker and influential multinational business. In 2015, we rank No.1 in China and No. 5 in worldwide weighty products industry.XCMG’s design machinery addresses an astonishing variety of tools, such as cranes, earth-moving  machinery, highway machinery, excavators, concrete equipment, mining equipment, piling equipment, lumber equipment, fire-combating machinery, hefty trucks, sanitation equipment, agricultural machinery, and a lot more. We have the world’s most complete solution line, and supply buyers comprehensive options for building tools.  Our other companies consist of finance, leasing, and remanufacturing.

At current, the power of my firm’s straight-arm crane is completely from the hydraulic oil force, that is, via the large-strain hydraulic oil to encourage the cylinder piston reciprocating movement, or push the hydraulic motor rotation makes the hydraulic winch and rotary mechanism rotation.
 
So, how do higher-pressure hydraulic oil get? Each and every truck crane is outfitted with a hydraulic pump when the motor vehicle chassis is matched, and the motor supplies power for it. The chemical power of the gasoline can be converted into the crankshaft of the The Travel HUB slides over the SHAFT. The generate hub includes a keyway which corresponds to the keyseat in the SHAFT. When a Key is in location, the two users are related. The clutch is locked onto the SHAFT with Set SCREWS.engine to rotate the mechanical vitality, and then the gearbox gear is rotated, and then the electrical power is transmitted to the hydraulic pump via the energy transmission of the gearbox. Therefore, the hydraulic pump can repeatedly pressurize the hydraulic oil For the higher-force hydraulic oil, so as to give electricity for the crane to attain the lifting of the goods.
 
Competitive Gain
My firm’s straight arm crane crane handles 1-25 tons fourteen versions sixty five kinds of goods, to meet up with a variety of circumstances, with the longest arm of the biggest tonnage crane mature production technological innovation, scientific study and advancement approach, superior Research and improvement technologies, and continuously have new items to industry, to satisfy client use.
My firm’s increase arm part with mature pentagonal, hexagonal and octagonal, the latest technology of items with U-formed arc arm physique excess weight reduction, arm width of a large deflection, security and resistance to deformation Capability to increase, significantly boost the lifting potential.
The software of the sub-arm, sub-winch and vice-hook supplies a basis for the speedy and massive-scale operation of the crane light load and the high-altitude operation. The software of computerized hook technologies saves time and energy when beginning and ending crane functions, ma ept it effortless to run easily.
Our company will offer you the high quality products with a low price, quick delivery,and professional after-sale service.
FAQ 
1: What type terms of payment can be acknowledged?
A: For phrases of payment, L/C, T/T, D/A, D/P, Western Union (can be) could accepted
2: What certificates are available in Machinery?
A: For the certification, we have CE, ISO, Gost, EPA(United states)CCC,
3: What about the delivery time?
A: 30 days right after acquiring the deposit.
four: What about the warranty time?
A: 12 months right after shipment or 2000 wor ept several hours, whichever occuts initial.
five. What about the Minimum Order Quantity?
A: The MOQ is 1 pcs    

Make contact with us

Mr Fang   86~13083988828 138581177787 9621 1467 
Mr Ding   86~13083988828 138581177788 5200 7271
Mr zou    86~13083988828 138581177782 6202 3988 
 

The use of original tools manufacturer’s (OEM) portion quantities or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our organization and the outlined replacement areas contained herein are not sponsored, accepted, or produced by the OEM.